THE MS3000 MARINE INVERTER/CHARGER

3000 Watts of pure sine wave power and Xantrex quality ! 

Finally an affordable high performance sine wave inverter/charger !

THERE'S NOTHING ELSE LIKE IT !

No longer do you have to decide between saving money by buying a modified sine wave inverter or breaking the bank with a pure sine wave unit. Xantrex has smashed the price/performance barrier with it's new pure sine wave MS3000 inverter/charger !

This aggressively priced high performance pure sine wave inverter is turning a lot of heads in the Marine inverter industry. It's feature packed design has the competition scrambling to play catch-up ! If you're looking for the very best that the industry has to offer.............. THIS IS IT !

 

PERFECT FOR RUNNING MICROWAVES, CLOCKS, DVD PLAYERS, COMPUTERS, SATELLITE RECEIVERS TELEVISIONS, SOUND SYSTEMS AND OTHER LARGER SENSITIVE ELECTRONICS IN YOUR SPECIFIC MARINE APPLICATION !

The Xantrex MS3000 is an ideal solution for your Marine power requirements. It delivers up to 3000 watts of sine wave output from your battery bank. This allows you to power simultaneous applications including microwaves, entertainment systems, computers and power tools without adding distortion or interference. Its 100 amp, power factor corrected charger ensures that your batteries are recharged quickly, using significantly less AC input current to produce the same high output charge current. Designed for easy installation and enhanced reliability, the MS3000 comes with a large AC wiring box, side-mounted DC connections and a built-in transfer switch that automatically transfers between inverter power and incoming AC power.

Product Features

Protection Features

 

 

Electrical Specifications
Output power (continuous) 3000 watts
Surge rating (5 second) 7500 watts (60 A)
Output voltage  120 Vac
Output waveform Sine wave < 3% THD
Output frequency  60 Hz +/- 0.05% (crystal controlled)
Efficiency (full load) > 85%
Peak efficiency > 90%
No load power draw (search mode) < 20 W
AC transfer switch Two legs at 50 A (split phase in), Two legs at 30 A (dual in)
 
Electrical Specifications-Charger
Output current 150 Adc
Battery voltage (nominal) 12 Vdc
Battery voltage range 10.0 - 15.5 Vdc
Charge Control 3-stage with manual equalize
Charge temperature compensation Remote battery sensor (included)
Efficiency  85% (typical)
AC input power factor 0.95
Input current (for 100A charging) 22 Arms (nominal) 
AC input voltage 120 Vac nominal
AC input voltage range 90 - 135 VAC
Compatible battery types Wet / Gel / AGM
Echo charge output current Not applicable
General Specifications
Operating temperature Range -4°F to 122°F (-20°C to 50°C)
Storage temperature -40°F to 122°F (-40°C to 50°C)
Dimensions (H x W x D) 8.17 x 13.25 x 16"  (208 x 336 x 406 mm)
Weight 70.0 lb / 31.8 kg
Warranty Two years
Part Number 809-3010
Accessories System Control Panel  809-0910
Generator Start 809-0903
Network Cable 3' 809-0935
Network Cable 25’ 809-0940
Network Cable 50’ 809-0941
Network Cable 75’ 809-0942
 
 
 
 
 
Regulatory Approvals
CSA/NRTL certified to CSA 107.1, UL 458 (Marine Supplement) 
ABYC designed to Marine Standards
FCC Class B/Industry Canada Class

 Click here to download PDF version of data sheet

 

About Xanbus Networking

 

Xanbus allows electrically powered devices to communicate status and control information with each other. The network enables simple control and configuration of multiple devices from a single point, eliminating the inefficiencies associated with devices working in isolation.

This illustration shows a simple Xanbus network found on a typical RV or boat. Each device connects to the backbone of the network, allowing it to share information with other devices. For example, when the inverter draws the batteries down to a level that cannot support the desired load, this information is shared to enable a generator to start automatically to recharge the batteries. Similar to a computer network, new devices can be added to a Xanbus network at any time.

Manufacturers that incorporate Xanbus-enabled products into their products will realize reduced installation costs, easier integration with other network-enabled devices, and lower warranty costs. End users enjoy simplified power management along with precise and helpful information about their system status.

Xanbus is being designed into our new inverters, inverter/chargers, battery chargers, and accessories. It is not compatible with our older products.

Click Here To Learn About Inverters Before You Buy !

 

Xantrex MS3000 Marine 3,000 Watt continuous 7,500 watt surge pure sine wave inverter. Includes a 150 Amp three stage battery charger and a built in AC transfer switch. Two legs at 50 A (split phase in), Two legs at 30 A (dual in) hardwire output. Dimensions 8.17" x 13.25" x 16"  Weight 70 LBS. 2 year warranty !

PN 809-3010

Click here to download PDF version of data sheet

 

LIST PRICE $2,499.00 

Please note: We've been asked by the manufacturer not to post prices that are lower than suggested retail. In honor of this request please call us for our unbeatable price !

SUPER SALE ! 

ON SALE NOW


1-877-498-6527
For Our Unbeatable Price !

Hurry, These Are Selling Like Hot Cakes !

 

 

 

 

ULTRA SECURE ORDER PROCESSING !

For your protection we do not use a server with a connection to the outside world and we do not store your credit card information.

This means that there is no paper record of your credit card transaction to be lost and unlike online shopping carts there is simply nothing there for hackers to get to.

Please 1-877-498-6527 to place your order.

  

Call 1-877-498-6527 For Our Unbeatable Price !   

 

 BATTERIES

CABLES 

 CHARGE CONTROLLERS

DC DISCONNECTS & BREAKERS

  ENERGY SAVING APPLIANCES

 FUSE BLOCKS & LIGHTNING ARRESTORS 

 GENERATORS

 INDIVIDUAL SOLAR CELLS

 INVERTERS

  INVERTER ACCESSORIES 

METERS & REMOTE CONTROLS

MISCELLANEOUS

SOLAR POWER KITS

SOLAR MODULES 

SOLAR MODULE MOUNTS

 SOLAR POWERED COOLERS 

 SOLAR POWERED WATER PUMPS

TRACKERS

WIND POWER 

  

RETURN TO INDEX

  Sales Policy